There are times when the Canon printer won’t connect to wifi. Well, that is because there are various issues that are responsible for this issue. One of the most common is network issues, corrupted drivers, or any change in the Wi-Fi network. Don’t worry as there are some troubleshooting steps that can help you resolve the issue in no time. Although canon printers are among the best printers out there, there are certain times when some issues can be faced. The reason can vary depending on the device and the kind of printer that you might have been pairing.
In this article, we will provide you with the best troubleshooting steps for canon Pixma printers won’t connect to wifi:
Update the drivers:
Updating the drivers can help you with fixing the issue. Well, you can use the application of driver fix. They are going to update the drivers in just one click. This is going to scan and figure out the out-of-the-date drivers that are installed. You can also proceed to update all the drivers at once. It has over 18 million driver files that are ready to download. You will easily be able to manage the escort ataşehir downloads, create a backup, and then save all the drivers in the compressed zip file.
See if there are any printer errors:
You need to ensure that the printer is displaying any errors such as the flashing lights or any kind of error codes on the screen. If you see that the printer is in the error state, then try using the error code in order to fix the issue. These are the errors that are usually going to occur when there is a paper jam, or if the ink has run out and the other issues. Well, make sure to address the error before you are going to proceed with other steps.
Perform the power cycle step:
In order to perform the power cycle, you need to turn off and then unplug the printer. After that, you need to unplug the wireless router for at least 15 seconds. After that power the router by connecting all the cables necessary. When the router is fully powered on, then plug the printer back in and then power it on. After that connect the printer to the network and then print any document.
Check for the printer connection issues:
When you see if the Canon printer is not connecting to the phone, then you must check if the printer is showing the connection as active. Also, if the signal strength is less than 80%, then try to temporarily remove the firewall. Try to print again and then check if there is any kind of improvement. If the distance is too much between the printer and the router, then make them as close as possible. You can also try to remove the obstacles between the two devices.
Reset the printer:
Well, press the power button in order to turn off the printer. Well, disconnect the data cable from the printer if it has one. After that unplug the power cord and then leave the printer idle for at least 10 minutes. Then you need to reconnect the power cord with the wall outlet. Make sure that you also connect it with the power outlet directly and not through any kind of surge protector. These are some steps through which you can resolve the issue of Canon printer not connecting to wifi. If you are still facing the issue and are not able to resolve it, then get in touch with the official experts of canon printer. They are experienced and will help you provide the best solutions! For further details visit the website businesslug.