Trusting Epson printers to get full HD prints with amazing features is the right path that you have chosen. But that’s totally fine if you are facing Epson error code 0x9e on your printer.
Epson code 0x9e is troubling just because of some common issues. You will be amazed to know, you can solve this issue without the help of any repairer or without installing any third-party application.
Read It!
You have to appropriately follow the imparted solutions without skipping any of the tips. If you will follow the guidelines properly then you will definitely get satisfying consequences. So, we hope you will adhere to the solutions properly.
Epson Error Code 0x9e – Valid Reasons
If you are keen to know the reasons that are responsible for this problem then you can look below at the bulleted points:
- Packaging material stuck in the printer.
- Paper or scrap jammed may troubleshoot.
- Internal deformities.
- The old version of the device may cause this issue.
- Internet instability and weakness may lead to this trouble.
Solutions To Fix Epson Error Code 0x9e | Useful Tips
We hope that you are ready to tackle this issue on your own. Are you really? That’s amazing, so lets begin without wasting much time.
Also Read : Epson Error Code 0x9d
Follow These Steps:
- Turn Off The Printer
Wait, do not press the turn-off button without continuing with some important practices, kindly follow them first and turn off your printer.
- Disconnect the Internet connection with your printer.
- Make sure the printer is not added to any device.
- There should not be any sheets in the tray of the printer.
- If LAN wire is connected then kindly separate it.
After following these rules you have to press the turn-off button for around 10 seconds. When the printer goes off disconnect the power cable from the socket.
- Look Inside The Printer
The main issue that leads to Epson error code 0xf4 and 0x9e is basically the uncleanliness. It causes by the paper, scrap, or foreign material jammed issue, trapped dust or ink cartridge issue.
- Open the cover of the printer.
- Look very carefully for any trapped paper (You can use a torch for good visibility).
- If you find any sheet of paper then with politeness take the page out from the printer.
- Clean The Dust:
- Just take a soft piece of cotton cloth.
- Dip it into the warm water and tightly squeeze it.
- Now, without harming any part of the printer, clean the internal dust properly.
- Kindly change the cloth if it gets dirty.
- Examine Ink Cartridge:
- Due to overheating most of the time the ink jar causes the leaking issue, kindly check it once.
- If it is leaking then kindly clean it properly and then install a new ink.
- Also, clean the nozzles and print heads.
- To clean the cartridge of the printer you can use available tools.
Let the printer dry properly. It hardly takes your 5 to 10 minutes. You can also place it under the face for proper and quick drying. After this gets done, connect the power wire and hold the start button till the printer turns on.
- Connect It With A Strong Internet
Many people made mistakes while connecting their devices to the Internet. To prescribe that you may not be one of them kindly note:
For Wireless Connections:
- Make sure that you are entering the correct secret phrase.
- The gap between the Internet source and the printer must be of 3 to 4 feet gap.
- Also, there should not be any barriers between them.
For Wired Connection:
- Check that the LAN wire should be connected properly
- The wire should not be damaged from any side. Change it with the new one if it is.
- The wire should not be folded from any side. In most cases this troubles, so kindly check it.
rom Epson error code 0x9e issue. If you are still having errors on the printer then kindly make sure that the printer should not be of the old version.
Hoping For Good Results
Was this article fruitful to you to easily overcome Epson printer error code 0x9e problem? Great, we will always be there with some quick and smart solutions. Thank you for being so trustworthy to us…
